Sand bottle & holders
Strong plastic bottle easy to refill and pour. Enables golfers to repair divots. Includes holder & bracket to easily attach to the base frame of MGI Series models.
Installation: If you have a bracket attached to the underside of the chassis (such as the seat bracket) you will need to attach you sand bottle with the toggle facing downwards so it can slide on the bar. Contrarily, if there is no bar attached you will need to flip your sand bottle bracket so the toggle is facing upwards so you can slide it through the bottom chassis of your caddy.
Ensure you choose the correct Sand bottle & holder for your respective caddy.
SET UP INSTRUCTIONS
Ai Series
1. Remove the 2 sand bottle parts from the packaging
2. Undo the plastic screw on the buggies undercarriage
3. Insert the bracket into the LEFT HAND SIDE ONLY of the chassis and re-tighten screw.
4. The bracket should not protrude from the right side of the chassis
5. The bracket's screw should face downwards
6. Attach the sand bottle to the end of the bracket
7. Tighten the screw on the buggies undercarriage to secure the bracket.
Ai Mounting Position: LEFT
Zip Series
1. Remove the 2 sand bottle parts from the packaging
2. Release the lever on the chassis undercarriage
3. Insert the bracket into the LEFT HAND SIDE ONLY of the chassis
4. The bracket should not protrude from the right side of the chassis
5. The bracket's screw should face downwards
6. Attach the sand bottle to the end of the bracket
7. Re-engage the lever on the chassis’ undercarriage to secure the bracket.
YOU MAY ALSO LIKE
